Kohler 10742A-CP Посібник з встановлення та експлуатації - Сторінка 3
Переглянути онлайн або завантажити pdf Посібник з встановлення та експлуатації для Сантехнічний виріб Kohler 10742A-CP. Kohler 10742A-CP 6 сторінок. Slide showers
Друкувати сторінку
INSTALLATION
1.
Press rail into the brackets and mark the wall through the screw holes
with a pencil. (Ensure that the rail is vertical).
2.
Drill 4 holes in the marked position and place plugs into holes.
3.
Place the Slider, the soap dish and the bracket covers onto the slide rail.
4.
Screw the slide rail to the wall and fit the bracket cover
5.
Fit the soap dish onto the bottom bracket cover.
6.
Install the Outlet Elbow to the G 1/2" nipple using thread tape.
7.
Thoroughly flush the plumbing before installing the Showerhead.
8.
Check for placement of rubber washers in each end of the Silverflex hose.
9.
Connect the shower hose to the Outlet Elbow and handpiece.
CARE AND CLEANING
Like anything of lasting quality, Kohler tapware and fittings require a certain
amount of periodic care to preserve their lustrous finish. Clean your new Kohler
tapware and fittings with a mild soap, rinse thoroughly with warm water and dry
with a clean, soft cloth. The ideal cleaning technique is to always blot dry any
water from metal surfaces.
Allowing water to evaporate on metal will form water deposits. It is important to
use a dabbing action to dry metal, not an abrasive or rubbing action.
Never use cleaners containing abrasive cleansers, ammonia, bleach, acids or
chemicals that can damage the finish. By taking the time to dry your tapware
often, soap and water deposits can be prevented.
Failure to comply with these instructions may void Kohler's warranty obligations.
3
1111352-A2-A