AEG DCE5960HM Посібник користувача - Сторінка 4

Переглянути онлайн або завантажити pdf Посібник користувача для Вентиляційна витяжка AEG DCE5960HM. AEG DCE5960HM 8 сторінок.

Друкувати сторінку

www.aeg.com

2. If needed, change the speed by

pressing the desired button.

The hoods light works

independently to other hood

functions. To illuminate the

cooking surface press the

light button

the light intensity touch and

hold the symbol again.To

change the light intensity

press the button

continuously.

To turn off the appliance press the first

speed button

3.2 Hob²Hood function

It is an automatic function which

connects the hob with a hood. Both the

hob and the hood have an infrared signal

communicator. Speed of the fan is

defined automatically on basis of mode

setting and temperature of the hottest

cookware on the hob. You can also

operate the fan using the hob manually.

The function can be activated from panel

of the hob.

For more information how to

use the function refer to the

hob user manual.

3.3 Filter notification

Filter alarm reminds to change or clean

the charcoal filter and clean the grease

filter. The filter indicator

for 30 seconds if the grease filter must

be cleaned. The filter indicator

4. CARE AND CLEANING

4.1 Notes on cleaning

Cleaning

Agents

. To change

again.

is turned on

flashes

Do not use abrasive detergents and brushes.

Clean the surface of the appliance with a soft cloth with warm water

and a mild detergent.

After cooking some parts of appliance can get hot. To avoid stains ap‐

pliance must be cooled down and dried with clean cloth or paper tow‐

els.

Clean stains with a mild detergent.

for 30 seconds if the charcoal filter must

be replaced or cleaned.

Refer to cleaning the grease

filter in care and cleaning

chapter.

Refer to cleaning the

charcoal filter or replacing

the charcoal filter in care and

cleaning chapter.

To reset the function press the button

for 3 seconds.

To activate or deactivate function:

1. To activate function press the button

for 3 seconds.

If the function is activated, the indicator

flashes two times.

2. To deactivate function press the

button

for 3 seconds.

If the function is deactivated, the

indicator

flashes ones.

3.4 Remote-control

The appliance is supplied with a remote-

control.

The connection is originally enabled.

To connect or disconnect remote-

control:

1. Switch off the appliance.

2. Press the

for 3 seconds.

The indicator on control panel flashes

twice if function is enabled and once if

disabled.