A-Neuvideo ANI-8PDU-12V Інструкція з експлуатації - Сторінка 9

Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Конвертер мультимедіа A-Neuvideo ANI-8PDU-12V. A-Neuvideo ANI-8PDU-12V 12 сторінок. 8-port 12v dc power manager

Друкувати сторінку

NEUVIDEO

WebGUI Overview

• STATUS:

This tab displays the current status of the various components of the unit in real-time.

• DEVICE:

This tab provides controls for all 8 power output ports as well as control over the optional external fans' speed and

temperature thresholds.

1. Power In: Displays the voltage, current and

wattage of the unit's main power supply.

2. Power Out: Displays the voltage, current and

wattage of each of the 8 individual power outputs.

3. System Temperature: Displays the unit's

temperature as measured at 3 locations inside the

case on the PCB.

4. System Fan: Displays the current state of 2

external fans (optional) including individual fan

RPM, and the current fan speed thresholds, if

auto mode is enabled.

1. Power Out: This section provides control over

each individual power output. The outputs may

be turned on, turned off, and renamed.

2. Fan Setting: This section provides controls

for any connected fans. When Auto Fan Mode is

enabled the fan speed will be controlled based

on the 3, user set, temperature thresholds and

speed selections. The preferred fan speed at

each threshold is also user configurable. If Auto

Fan Mode is disabled, the fan speed can be set

as a static percentage of maximum power. If 2

fans are connected to the unit, both will follow the

same settings.

Note: The highest of the (3) System Temperature

measurements is used to determine which Auto

Fan Mode speed (low, middle, or high) is active

when Auto Fan Mode is enabled.

WebGUI Control