ACA ALLERTOR 125 Посібник з монтажу, експлуатації, технічного обслуговування та запасних частин - Сторінка 5
Переглянути онлайн або завантажити pdf Посібник з монтажу, експлуатації, технічного обслуговування та запасних частин для Система безпеки ACA ALLERTOR 125. ACA ALLERTOR 125 17 сторінок. Rotating directionial siren
Друкувати сторінкуROOF MOUNT (FIGURE 1)
The siren may be mounted as shown on a support or platform on a flat roof.
See Figure 5 for details of construction for a suggested roof mount. The siren
should be mounted higher than the highest snow level anticipated at the
installation.
PARAPET MOUNT (FIGURE 2)
Various custom-built mounts may be used similar to the parapet mount
illustrated. Actual design will be dictated by building construction and height
desired.
CHIMNEY MOUNT (FIGURE 3)
A sturdy chimney may provide a convenient support for mounting the siren.
The possibility of corrosive or staining smoke should be considered when this
type of installation is planned. Use 4" heavy wall galvanized pipe to a
maximum height of 10 feet above the top of the chimney. Use larger pipe for
greater height.
TOWER OR TANK MOUNT (FIGURE 4)
A properly situated tower or tank may serve as an ideal mount. The
support platform must be designed with adequate bracing to carry the
total load.
- 5 -