AEG Perfekt Insert?24 Інструкція з експлуатації - Сторінка 5
Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Вентиляційна витяжка AEG Perfekt Insert?24. AEG Perfekt Insert?24 8 сторінок.
Друкувати сторінку
Specifications
Perfekt‐Insert‐24
Power Supply
Rated Input Power
Lighting Power
Motor Power
Airflow
Outlet Diameter
Perfekt‐Insert‐30
Power Supply
Rated Input Power
Lighting Power
Motor Power
Airflow
Outlet Diameter
Perfekt‐Insert‐36
Power Supply
Rated Input Power
Lighting Power
Motor Power
Airflow
Outlet Diameter
115V, 60Hz
97W
1 x 2W
95W
300 CFM
150mm
115V, 60Hz
97W
1 x 2W
95W
300 CFM
150mm
115V, 60Hz
99W
2 x 2W
95W
300 CFM
150mm
11 | P a g e
Installation (duct is not supplied)
1. The range hood should be mounted
at a distance of 600mm from an
electric or induction cooktop, and
762mm above a gas cooktop for
safety and optimum performance. If
the instructions for installation of the
gas cooktop specify a greater
distance, this has to be taken into
account. (see pic 1) The exhaust air must
not be discharged into a chimney which is used for
exhausting fumes from other appliances burning gas or
other fuels.
For the province of British Columbia
The base of the AEG insert hood is made of stainless steel and uses a
stainless steel filter. There are no plastic components on the lower
side of the hood. In addition, the housing of the motor is metal.
These hoods are tested at 24" above gas cooktops in the production
test facility. At this height, ignition is not possible. The hoods can be
installed 24" above gas cooktops.
2. To install, drill 2 holes of Ø8mm on a sturdy wall and in
line with the hood
3. Insert expanding screws into the holes
4. Fix drilling template on the wall (see pic 2)
5. The appliance should be embedded into the wall unit
or another support. This process should be carried out
by 4 screws suitable for the kind of unit following the
instructions for the drilling of the holes as shown (see
pic 3)
Pic 1
4 | P a g e