A-Neuvideo ANI-16-MV-HDMI Інструкція з експлуатації - Сторінка 5
Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Монітор A-Neuvideo ANI-16-MV-HDMI. A-Neuvideo ANI-16-MV-HDMI 12 сторінок. Hdmi multi-viewer w/ seamless switcher
Друкувати сторінку
A
NEUVIDEO
FRONT PANEL
POWER:
Press this button to power the device ON/OFF. The LED will illuminate Green when the power is ON, Red when it is in
q
'Standby' mode.
LOCK:
Press this button to lock all the buttons on the panel, press again to unlock. The Red LED will illuminate when the button is
w
locked.
IR RECEIVER WINDOW:
e
HDMI INPUT SELECTION:
r
MODE:
Press the button to select display mode.
t
RESOLUTION:
Press the button to select the output resolution.
y
NO.
RESOLUTION
1
1080P, Main image audio
2
1080I, Main image audio
3
720P, Main image audio
4
1360x768, Main image audio
5
1024x768, Main image audio
REAR PANEL
HDMI INPUT:
Connect HDMI sources. LED 1-16 illuminate when the HDMI signal plug in corresponding input port with HDMI cable.
q
HDMI OUTPUT:
Output for displays, AVR etc. LED illuminate when the display plug in corresponding output port with HDMI cable.
w
RS-232:
Connect to a PC or control system with D-Sub 9-pin cable for the transmission of RS-232 commands.
e
IR EXT:
NOT USED
r
DC POWER IN:
Plug the 12V/5A DC power supply into the unit and connect the adapter to an AC outlet.
t
q w e
NOT USED
Press to select the input from 1 to 16.
FRONT & REAR PANELS
r
q
3
t y
w
e r t