Kohler Archer Heated BubbleMassage K-1124-GHLAW Посібник із швидкого старту - Сторінка 2
Переглянути онлайн або завантажити pdf Посібник із швидкого старту для Сантехніка для ванної кімнати Kohler Archer Heated BubbleMassage K-1124-GHLAW. Kohler Archer Heated BubbleMassage K-1124-GHLAW 2 сторінки.
Друкувати сторінку
11-1/4"
(286 mm)
18"
(457 mm)
3-3/8"
(86 mm)
3-3/4"
(95 mm)
15-3/16"
(386 mm)
3-1/2"
(89 mm)
Required Electrical Service
Two dedicated circuits required, protected with Class A Ground-
Fault Circuit-Interrupter (GFCI). Outside North America, this
device may be known as a Residual Current Device (RCD).
Blower, Heated
120 V, 15 A, 60 Hz
Surface:
Heater:
120 V, 15 A, 60 Hz
Technical Information
All product dimensions are nominal.
Installation:
Three-wall alcove
Drain location:
Left
Basin area, bottom:
51-3/8" x 21" (1305 mm x 533 mm)
Basin area, top:
64-1/2" x 30-1/2" (1638 mm x 775 mm)
Weight:
121 lbs (54.9 kg)
Minimum floor load:
42 lbs/ft² (205.1 kg/m²)
Water depth:
15" (381 mm)
Water capacity:
72 gal (272.5 L)
Electrical component
Blower: 120 V, 10 A, 60 Hz
rating:
Heated Surface: 120 V, 0.5 A, 60 Hz
Heater: 120 V, 5 A, 60 Hz
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com.
5-29-2021 13:58 - US/CA
72" x 36" Heated BubbleMassage
72" (1829 mm)
1-1/2" Bath Drain
No change in measurements
if connected with drain illustrated. (K-7272)
36"
(914 mm)
Lumbar
Angle 42°
Notes
Measure your actual product for rough-in
details.
Install this product according to the installation
instructions.
The hot water supply should be 70% of the
capacity of the bath or greater. Installations will
vary.
Remote blower installation kit is available
for relocating the blower. Provide access for
servicing the blower.
Do not relocate or alter the PVC tee or coiled
flexible tubing connected to the blower. Follow
the blower relocation instructions exactly.
Archer
air bath w/ Bask
™
K-1124-GHLAW
1-1/4"
(32 mm)
3/8"
(10 mm) R
Integral Flange Detail
1-9/16"
(40 mm)
20-1/4"
(514 mm)
®
®