Kohler ARICA K-705231 Інструкція з монтажу Посібник з монтажу - Сторінка 4
Переглянути онлайн або завантажити pdf Інструкція з монтажу Посібник з монтажу для Сантехніка для ванної кімнати Kohler ARICA K-705231. Kohler ARICA K-705231 12 сторінок. Neo-angle shower enclosures
Друкувати сторінку
CAUTION: Risk of injury. Wear Safety Glasses.
Lightly center punch the four hole locations on each wall.
On ceramic tile, use a center punch to nick the surface
glaze. Tap the punch lightly with a hammer so as not to
crack the tile.
Drill all eight holes into the walls with a 5/16" drill bit. Use
a 5/16" masonry bit for ceramic tile.
After drilling holes, thoroughly clean the receptor ledge
and wall. Insert the hollow wall anchors into all four 5/16"
drilled holes. Repeat the procedure for the other side.
Install each wall jamb by aligning the wall jamb locator
holes with the holes in the wall. Secure wall jambs by
inserting four #8-18 x 1-1/4" panhead screws through
each wall jamb into the installed wall anchors.
C. INSTALL RETURN PANELS
Slide the return panels over each wall jamb as shown.
D. DETERMINE LEFT SIDE OR RIGHT SIDE
PIVOT
Determine whether the door will pivot on the left or the
right side. Make certain that the door path is free of
obstructions.
To convert between a left-hand or right-hand door, turn the
door upside down.
All of the following illustrations are for a right pivot
door (panel swings open toward the right).
BC
116896-2-
Installed Wall
Anchor
#8-18 x 1-1/4"
Panhead Screw
Wall Jamb
Return Panel
Left Pivot
4
Right Pivot
Kohler Co., Kohler, WI U.S.A.