Kohler BEAM K-23056T Інструкція з монтажу - Сторінка 4
Переглянути онлайн або завантажити pdf Інструкція з монтажу для Сантехніка для ванної кімнати Kohler BEAM K-23056T. Kohler BEAM K-23056T 4 сторінки. Sensor faceplate
Друкувати сторінку
7. The installation of pinch plate, the pinch plate installation
provides another method for faceplate, that is, the
faceplate don't rely on the position of the in wall tank and
the mask, and can directly install the faceplate to the false
wall. The location of faceplate to refer the 1 meter high
from the finished floor to center of faceplate is
recommended. 7~20mm thickness is recommended for the
wall of the pinch plate and at least 80mm gap is reserved.
Recommended the installation hole size of
+2
+2
201
X 136
mm. See figure
0
0
Finished Floor
8. The installation of mask, 4 holes with diameter of 10mm
and depth of 16mm are needed to be reserved at the
locating hose. Drill 10mm holes through air hose on the
side of mask. See figure
1331845-T01-B
478 3
438 3
180 3
230 3
Fix Mask Onto Wall
Air hose
10 Depth 16,
Space reserved
10 16
7.
80mm
Pinch plate
Supporting
Board
Finished wall
Air hose
8.
10mm
Finished
wall
72
-4-
7~20mm
+2
+2
201
X 136
mm
0
0
7~20mm recommended
7~20mm
At least 80mm gap reserved
80mm
+2
201
0
+2
136
0
4
10mm 16mm
1