Kohler C3-520 Посібник з монтажу - Сторінка 7

Переглянути онлайн або завантажити pdf Посібник з монтажу для Сантехніка для ванної кімнати Kohler C3-520. Kohler C3-520 17 сторінок. Smart seat
Також для Kohler C3-520: Посібник для власників житла (41 сторінок), Посібник з монтажу (33 сторінок), Посібник з монтажу (17 сторінок)

6.1 Connect the Water Supply (K-31333KR-0)

IMPORTANT! Risk of product damage. Align water inlet hose thread with cover

thread, do not damage threads or over tighten connector. To tighten the connector,

manually tighten and tight 1/4 turns more by tool.

IMPORTANT! Risk of product damage. Do not scratch the product surface.

Connect the T-valve directly to the water inlet valve.

NOTE! For those newly installed plumbing pipes, (before the inlet hose is

connected to the T-valve,) flush for several seconds to to remove the dirt and

debris, etc inside the hose.

Connect cover and water tank with supplied hose.

Note: use supplied new hose, do not reuse the old hose.

Adjust filter angle and position (for easy exchange in the future, cartridge

exchange refer to "Homeowner's Guide" on page 14).

Open cartridge cover when use filter first time.

Adjust exchange duration to 6 months.

Rotate and install cartridge cover properly (refers to Homeowner's Guide on

Page 14).

Tighten all connections.

Turn on water supply system

Note! Flush the water supply pipes completely to remove debris. The product

is designed for tap water. Make sure not to use industrial water/sewage water/

waste water/ocean water.

Check water leak, adjust if necessary.

Kohler Co.

Tighten filter inlet

Connect to cover

Connect to water tank

1350324-KR01-A