Kohler Components 77984T-9E Інструкція з монтажу

Переглянути онлайн або завантажити pdf Інструкція з монтажу для Сантехніка для ванної кімнати Kohler Components 77984T-9E. Kohler Components 77984T-9E 2 сторінки. Floor mount bath filler with handshower

Kohler Components 77984T-9E Інструкція з монтажу
SERVICE PARTS
77984T-9E
Floor Mount Bath Filler With Handshower
1327565**
1386906(For BL/BN)
1327564(For others)
1082901
1087824
1384765**
834404
1403178**
1343467**
880010
1416818
1144498**
77420
880010
1080954
831727**
880010
(For others)
**Color code must be specified when ordering.
1327567-AN2-D
COMPONENTS
74463
1289681
1087824
1091126
1384765**
1017949
1330683**
1330682**
78125
1119281
834638
1177225
1248781**
(For 2BL&BL)
1082901
1084120
77955
1010167
INSTALLATION INSTRUCTIONS
77984T-9E
BEFORE YOU BEGIN
All information is based on the latest product information available at the time of publication. Kohler Co. reserves
the right to make changes in product characteristics, packaging, or availability at any time without notice.
Please leave these instructions for the consumer. They contain important information.
NOTES:
1. Flush the water supply pipes thoroughly to remove debris.
2. An inline water filter must be used with this product.
3. Inspect the supply tubing for damage. Replace as necessary.
4. Observe local plumbing codes.
5. The minimum working pressure for the diverter is 0.05MPa(0.5bar).
6. Check for leaks before covering the pipes, repairs as needed.
7. The highest working pressure for handshower is 0.5MPa(5bar). If it exceeds 0.5MPa(5bar), a pressure
reducer is needed. The highest water and environment temperature is 60ºC. Please keep handshower and
shower arm away from heater, or it may become damaged and cause injury to the user.
8. Please purchase the matched mounting base 97905T-DR when install the faucet.
9. All installations should comply with the relevant requirements of AS/NZS 3500 and AS/NZS 6400.
ROUGH-IN DIMENSIONS
Ø29
10º
*244
*70 Min.
Bathtub
* Please purchase the appropriate bathtub according to the dimension.
4
1327567-AN2-D
COMPONENTS
Floor Mount Bath Filler With Handshower
218
47
Ø160
135
Ø48
Ø26
G1/2˝B
Ø120
Ø28
G1/2˝B
G1/2˝
G1/2˝
G1/2˝
G1/2˝
For 2BL&BL
For others
1