Kohler K-1018 Посібник з монтажу - Сторінка 8

Переглянути онлайн або завантажити pdf Посібник з монтажу для Сантехніка для ванної кімнати Kohler K-1018. Kohler K-1018 40 сторінок. Shower modules and receptors
Також для Kohler K-1018: Посібник для власників житла (8 сторінок)

Друкувати сторінку

Stud wall leaning inward

7. Shimming Procedures

- If either wall is not plumb, it will adversely effect the fit of the wall panels to the receptor and the fit of the shower

door to the walls.

- If one or both of the stud pocket walls are leaning inward toward the receptor, the receptor will have to be moved

away from the stud pocket until the walls sit plumb.

- If one or both of the stud pocket walls are leaning outward away from the receptor, you will have to shim

between the nail-in flange of the wall and stud pocket until the shower wall is plumb.

- Depending on the severity of the out- of- plumb condition and the shimming required, you may have to move

your drain pipe and/or rough plumbing to align with the receptor in its plumb condition.

1024937-2-

Shim at each nail

Note: Position the shims so they are held in place by the fasteners

whenever possible. Drill pilot holes through the shims to avoid

splitting them when the fasteners are installed.

Stud wall leaning outward

Shim at each nail

Kohler Co.