Kohler K-12183 Посібник з монтажу - Сторінка 4

Переглянути онлайн або завантажити pdf Посібник з монтажу для Сантехніка для ванної кімнати Kohler K-12183. Kohler K-12183 21 сторінка. Centerset lavatory faucet
Також для Kohler K-12183: Посібник для власників житла (25 сторінок), Посібник з монтажу (21 сторінок), Посібник з монтажу (17 сторінок)

Apply plumbers

putty.

Rubber Washer

Flat Washer

3. Install the Drain

CAUTION: Risk of product damage. Never pull on the drain

cap to open the drain. Press and release the drain cap once to

close it. Press and release it again to open it.

Remove the seal from the body.

Apply a 1/2" (1.3 cm) diameter ring of plumbers putty or other

sealant around the underside of the body according to the putty

manufacturer's instructions.

Insert the body into the ﬁxture drain hole.

Attach the rubber washer (tapered side up) to the body.

Install the ﬂat washer over the threads of the body.

Partially thread the nut onto the body. Do not tighten at this time.

Orient the "KOHLER" logo as desired. Adjustment is not possible

after ﬁnal assembly.

Wrench-tighten the nut.

Apply sealant tape to the top of the tailpiece threads before

screwing it into the body.

Connect the tailpiece to the body.

Remove any excess putty or sealant.

1011034-2-E

Body

Lavatory

Nut

Tailpiece

Kohler Co.