Kohler K-1246 Посібник з монтажу - Сторінка 12

Переглянути онлайн або завантажити pdf Посібник з монтажу для Сантехніка для ванної кімнати Kohler K-1246. Kohler K-1246 48 сторінок. Bath whirlpool
Також для Kohler K-1246: Посібник для власників житла (32 сторінок), Посібник з чорнової обробки (4 сторінок), Посібник з монтажу (48 сторінок), Посібник з чорнової обробки (4 сторінок), Посібник з монтажу (44 сторінок)

10. Complete the Finished Deck

If you have not already done so, carefully remove the protective tape from the whirlpool rim.

Cover the framing with water-resistant deck material. Seal the joints between the whirlpool rim edge and

the water-resistant deck material with silicone sealant.

Tape and mud the water-resistant deck material. Install the ﬁnished deck to the water-resistant deck

material. Seal the joints between the whirlpool rim and the ﬁnished deck material with silicone sealant.

Install the faucet trim according to the trim manufacturer's instructions.

When cleaning up after installation, do not use abrasive cleansers, as they may scratch and dull the

whirlpool surface. Use warm water and a liquid detergent to clean the surface.

Remove stubborn stains, paint, or tar with turpentine or paint thinner. Do not allow cleaners containing

petroleum distillates to remain in contact with any whirlpool surfaces for long periods of time. Remove

plaster by carefully scraping with a wood edge. Do not use metal scrapers, wire brushes, or other metal

tools. Use a powder-type detergent on a damp cloth to provide mild abrasive action to any residual

plaster.

1010564-2-B

Finished

Deck

Apply silicone sealant to the edges

Material

of the water-resistant deck material

and the finished deck

Framing

Whirlpool

Water-Resistant

Deck Material

Kohler Co.