AEG TR939M4OBC Посібник користувача - Сторінка 19
Переглянути онлайн або завантажити pdf Посібник користувача для Сушарка AEG TR939M4OBC. AEG TR939M4OBC 36 сторінок.
Друкувати сторінкуprogramme will start at the right
moment for ending.
7.7 Favourite programmes
These selector positions are available
after the appliance have been connected
to Wi-Fi.
The favourite programmes can be set
and saved via App only choosing from
the available ones which are divided into
the three categories indicated on the
control panel.
Once the favourite programmes have
been set, you can select one of them via
App or by turning the programme dial to
relevant position: the relevant led comes
on and the information on the display are
updated accordingly.
The favourite programmes
can be cancelled through the
related App command or
pressing the Factory Default
key combination.
7.8
SyncDry function
This feature lets your tumble dryer to
automatically set the most appropriate
programme that matches the last
washing program recently executed. All
you need to do is start the drying
programme once your tumble dryer is
loaded. No other programme settings or
options are required on the tumble dryer.
Once the washing programme has come
to an end, the washing machine transfers
the programme data via the home router
Wi-Fi to the AEG Cloud, as well as to
your tumble dryer.
In order to use the SyncDry
function, the AEG tumble
dryer and washing machine
must be connected to the
same home network and
paired with the My AEG
Care application.
To activate the function:
1. Once the wash cycle has come to an
end, place the clean laundry in the
tumble dryer.
2. Touch SyncDry button.
3. All display symbols will stay lighted
off except Wi-Fi icon and ProSense
bars that run an animation for a few
seconds as the appliance is
retrieving data from the cloud.
4. Display will update itself
automatically with the suggested
programme. After 10 seconds, if data
retrieving is unsuccessful, the button
LED is switched off and the machine
gives an acoustic error signal. Then
previously selected programme is
restored.
5. Touch Inicio/Pausa button to begin
drying process.
When SyncDry programme
is set, user is still allowed to
change options or select
another program by rotating
knob or using APP. In such
cases SyncDry button LED
will turn off to indicate that
the program is not anymore
the suggested one; SyncDry
automatic program can be
selected again by pressing
related button until data is
available on Cloud.
ENGLISH
19