Kohler EVOK K-18347T Інструкція з монтажу - Сторінка 5
Переглянути онлайн або завантажити pdf Інструкція з монтажу для Ванни Kohler EVOK K-18347T. Kohler EVOK K-18347T 5 сторінок. Freestanding acrylic bath
Друкувати сторінку
C.
Remove and
install the
bath
If the freestanding bath needs removing, please follow
the steps below:
1)
Lift the bath levelly, then the guide pin could be
pluged out of the guide bush. Then remove the nut
on the drain tail pipe.
2) When installing the freestanding bath, please first
apply lubricating oil both to the inner surface of the
guide bush and the outer surface of the guide pin,
and then insert the guide into the guide bush.
IMPORTANT CONSUMER INFORMATION
Cleaning and Care
Cleaning Acrylic Surfaces: Do not use abrasive
cleansers on any acrylic surfaces, as they will scratch
and dull the surface. Wipe out the bath after each use
to prevent a build-up of soap and scum.
If the acrylic surface becomes dull, an automotive type
rubbing compound may be used on the unit, followed
*
by an application of paste wax.
*
We recommend:
Rubbing compound mequiars mirror glaze 28 metal
polish (import product)
G
reen oil.
1119528-T01-C
freestanding
C.
1)
Nut of the Drain Tail Pipe
2)
*
2
Mequiars
(
)
-5-
*
28
(
)