Kohler WELLWORTH LITE K-3414-PB Інструкція з монтажу Посібник з монтажу - Сторінка 3

Переглянути онлайн або завантажити pdf Інструкція з монтажу Посібник з монтажу для Туалети Kohler WELLWORTH LITE K-3414-PB. Kohler WELLWORTH LITE K-3414-PB 8 сторінок. Vitreous china reverse trap toilet

Друкувати сторінку

INSTALLATION

TO REMOVE EXISTING TOILET

Turn off water supply. Flush the toilet and sponge out re-

maining water from tank and bowl. Disconnect supply

valve and remove old tank and bowl.

Remove old gasket from the floor and closet flange with

a putty knife. Remove old T-bolts and discard.

NOTICE: If a new toilet is not installed immediately,

temporarily stuff a rag in the closet flange.

Install new 5/16" diameter T-bolts.

TO INSTALL NEW SUPPLY SHUT-OFF

VALVE

Install toilet supply shut-off valve so it is 9" above floorline

and 4-1/8" to the left of the centerline of the closet flange.

Centerline of supply shut-off outlet should extend 4" from

finished wall. Install the supply shut-off valve with outlet

vertical.

Kohler Co., Kohler, WI

T-Bolts

14"

Closet Flange

Fig. #2

Closet Flange

Fig. #3

Supply Shut-Off

Valve

4-1/8"

Fig. #4

111784-2-

(9412)