Kohler SV810-840 Посібник користувача - Сторінка 14

Переглянути онлайн або завантажити pdf Посібник користувача для Двигун Kohler SV810-840. Kohler SV810-840 21 сторінка. Vertical crankshaft
Також для Kohler SV810-840: Посібник користувача (21 сторінок), Посібник користувача (20 сторінок)

Kohler SV810-840 Посібник користувача
3. The fuel system must be completely emptied,
or the gasoline must be treated with a stabilizer
to prevent deterioration. If you choose to
use a stabilizer, follow the manufacturer's
recommendations, and add the correct amount for
the capacity of the fuel system. Fill the fuel tank
with clean, fresh gasoline. Run the engine for 2-3
minutes to get stabilized fuel into the carburetor.
Close fuel shut off valve when unit is being stored
or transported.
To empty the system, run the engine until the tank
and system are empty.
4. Remove the spark plugs. Add one tablespoon of
engine oil into each spark plug hole. Install plugs,
but do not connect the plug leads. Crank the
engine two or three revolutions.
5. Store the engine in a clean, dry place.

Parts Ordering

The engine Specification, Model, and Serial Numbers
are required when ordering replacement parts from
your Kohler Engine Service Dealer. These numbers are
found on the identification plate which is affixed to the
engine shrouding. Include le er suffixes if there are
any. See Engine Identification Numbers on page 5.
Courage
SV710-740 Specifications
®
Model: ...................................................................................SV710 .................................SV715 ...........................SV720
Bore: ................................................ mm (in.)......................83 (3.27) .............................83 (3.27) .......................83 (3.27)
Stroke: ............................................. mm (in.)......................67 (2.64) .............................67 (2.64) .......................67 (2.64)
Displacement: ................................. cm
Power (@ 3600 RPM): ....................kW (HP)......................14.9 (20*) ...........................16.4 (22*) .....................17.2 (23*)
Compression Ratio: .............................................................9:1.......................................9:1.................................9:1
Weight: ............................................... kg (lb.)......................41.2 (91) .............................41.2 (91) .......................41.2 (91)
Oil Capacity (w/filter) - approximate,
determined by oil filter used: ---------------------------------------- 1.6-1.8 L (1.7-1.9 U.S. qt.) ---------------------------------------
Lubrication: -------------------------------------------- Combination Pressure/Splash Lube w/full Flow Filter -------------------
Model: ...................................................................................SV725/SV730 ....................SV735 ...........................SV740
Bore: ................................................ mm (in.)......................83 (3.27) .............................83 (3.27) .......................83 (3.27)
Stroke: ............................................. mm (in.)......................67 (2.64) .............................67 (2.64) .......................67 (2.64)
Displacement: ................................. cm
Power (@ 3600 RPM): ....................kW (HP)......................17.9(24*)/18.6 (25*) ...........19.3 (26*) .....................20.1(27*)
Compression Ratio: .............................................................9:1.......................................9:1.................................9:1
Weight: ............................................... kg (lb.)......................41.2 (91) .............................41.2 (91) .......................41.2 (91)
Oil Capacity (w/filter) - approximate,
determined by oil filter used: ---------------------------------------- 1.6-1.8 L (1.7-1.9 U.S. qt.) ----------------------------------------
Lubrication: -------------------------------------------- Combination Pressure/Splash Lube w/full Flow Filter --------------------
Exhaust Emission Control System for models SV710-SV740 is EM for U.S. EPA and Europe; PAIR for California Tier III.
* Horsepower ratings exceed Society of Automotive Engineers Small Engine Test Code J1940. Actual engine
horsepower is lower and affected by, but not limited to, accessories (air cleaner, exhaust, charging, cooling, fuel
pump, etc.), application, engine speed and ambient operating conditions (temperature, humidity, and altitude).
Kohler reserves the right to change product specifications, design, and standard equipment without notice and
without incurring obligation.
14
3
(in
3
)......................725 (44.2) ...........................725 (44.2) .....................725 (44.2)
3
(in
3
)......................725 (44.2) ...........................725 (44.2) .....................725 (44.2)
Always insist on genuine Kohler parts. All genuine Kohler
parts meet strict standards for fit, reliability, and
performance.

Major Repair

Major repair information is available in Kohler Engine
Service Manuals. This type of repair generally requires
the services of a trained mechanic and the use of
special tools and equipment. Kohler Engine Service
Dealers have the facilities, training, and genuine Kohler
replacement parts necessary to perform this service.
For the nearest Sales & Service location:
• visit our website www.kohlerengines.com
• call 1-800-544-2444 (U.S. & Canada)
• look in the yellow pages under Engines-Gasoline

Model Designation

Model SV730 for example: S designates Courage
engine, V designates vertical cranksha , and 730
indicates the numerical model designation. A le er
suffix designates a specific version as follows:
Suffix Designates
S
Electric Start