Kohler 1.4BEOR-12V Операція - Сторінка 29

Переглянути онлайн або завантажити pdf Операція для Портативний генератор Kohler 1.4BEOR-12V. Kohler 1.4BEOR-12V 44 сторінки. Heavy duty truck mobile generator sets

Друкувати сторінку

4. Loosen and remove the wing nut in order to remove

the air filter. See Figure 5-16.

5. If the air filter is dirty or clogged, replace with a new

air filter.

1. Wing nut

2. Air filter

Figure 5-16 Removing Air Filter

6. Before re-installing the air filter, make sure the

rubber gasket is intact or replace, if necessary. See

Figure 5-17.

1. Rubber gasket

Figure 5-17 Rubber Gasket

7. Remove four screws to disassemble the prefilter

and check for clogging. If necessary, remove it

from its position on the lower part of the air filter

cover. Clean if clogged by blowing air through the

prefilter. See Figure 5-18.

TP-6687

9/10

Figure 5-18 Prefilter

tp6576

10. Make sure the air filter is mounted correctly to

11. Re-attach the air filter cover again by turning the

5.5 Control Operation Following

If leaks or dripping are found, operate as follows:

tp6576

After completing the maintenance operations, replace

the access panels on the power unit enclosure with the

supplied plastic key. See Figure 5-5.

1. Prefilter

2. Air filter cover

8. After cleaning, replace the prefilter on the air filter

cover.

9. Reassemble the air filter, making sure that the

rubber gasket is in the proper position, then tighten

the wingnut.

prevent dust or impurities entering the intake ducts.

knob clockwise.

Maintenance

1. If the leaks are due to incorrect assembly of

components, correctly reassemble the pipes and/

or components that have been modified.

2. If the leaks are due to breakage or system

irregularities,

contact

distributor/dealer.

Section 5 General Maintenance

tp6576

authorized

Kohler