Kohler CLW Series Інструкція - Сторінка 3

Переглянути онлайн або завантажити pdf Інструкція для Внутрішнє оздоблення приміщень Kohler CLW Series. Kohler CLW Series 4 сторінки. Cabinet

3. ATTACHING SIDE KITS TO A SURFACE

MOUNTED CABINET

1. Apply foam tape to Side kit bracket

A. Peel tape from sheet, leave liner on.

B. Apply as shown to side kit brackets, be sure they are

clean and dry.

C. DO NOT PEEL RELEASE LINER UNTIL YOU

HAVE TEST FIT THE MIRRORS ON THE

CABINET!

2. Attach the side kit brackets to the cabinet as shown

in Fig. 6

3. Test fit the side kits, then clean the back of the side kits

with rubbing alcohol.

4. Peel the release tape from the brackets and apply the

side kits, push firmly to set.

5. Cover the screw heads with the screw caps.

Fig. 6

Align top of side kit with top of flange

Side kit bracket

(Fits tight under the

flange of cabinet)

#8 x 3/8" screws

self thread into

Side Kit brackets

4. DOOR ADJUSTMENTS

A. This screw releases the door from the cabinet and

allows up and down adjustment. Fig.7

B. These screws allow you to plumb

Fig. 7

C. The screws you use for attaching the hinges.

(Supplied with hinges)

8-32 x 1/2"

2 pieces

26" high

the door as shown in Fig. 8.

Fig. 8

6-32 x 3/8"

1070225-2-A