acaia PS002 Посібник користувача - Сторінка 18

Переглянути онлайн або завантажити pdf Посібник користувача для Ваги acaia PS002. acaia PS002 20 сторінок.

LED Indicators

Battery charge

Tare operation

Battery charge/Charge error

The orange indicator on the upper left turns on when the battery is charging and turns off

when the battery is fully charged. The indicator starts flashing or does not appear when the

USB cable is not working.

Tare operation

The orange indicator on the lower left turns on when the Tare button is pressed.

Ounce indicator

The green indicator on the upper right turns on when the weight is measured in ounces.

Espresso Mode indicator

The green indicator on the lower right turns on when in Espresso Mode.

Error Code

Description

Access Code Error, unrecognized access code.

Error 100

EEPROM error, unable to access memory. Please contact Acaia support.

Error 101

AD error, unable to access weighing signal. Please contact Acaia support.

Error 102

Unable to find acceptable starting Zero point, most likely because the loadcell

Error 303

has been damaged by excessive force or drop. Please contact Acaia support.

Maximum

Overload: the weight is over the maximum capacity.

Underload: the weight is under the minimum capacity.

Underload

Calibration error. Calibration cannot proceed when environmental noises are

Error 304

too strong. Please calibrate in a stable environment free of wind, vibration, etc.

Unable to tare because the weight exceeds the acceptable tare range.

Error 802

Unable to tare because the weight is unstable.

Error 803

Display Code Description

The scale is in update mode. During the update process, the green LED on

the lower right will blink until the process is complete.

UPDATE

Note: If you want to leave update mode, please connect the scale's USB to a

power source.

Ounce indicator

Espresso Mode indicator