acaia ORION BEAN DOSER Посібник з експлуатації - Сторінка 11
Переглянути онлайн або завантажити pdf Посібник з експлуатації для Кухонна техніка acaia ORION BEAN DOSER. acaia ORION BEAN DOSER 11 сторінок.
Також для acaia ORION BEAN DOSER: Посібник з експлуатації (15 сторінок)
Друкувати сторінкуAction
Enter Unit Settings
Toggle Unit Options
4.5 About
Action
Enter Set Menu
Enter Unit Settings
Chapter 5: Calibration
5.1 Calibrating the Orion
In weighing mode, press the Dose button 5 times to enter the user calibration mode.
Place a 500 g calibration weight on the platform and allow the Orion to calibrate.
1. While the Orion is in Weighing Mode and the weighing unit is in gram, press the Dose
button quickly multiple times until LED display shows [ CAL ] and then [ 500 ].
2. Place a 500 g calibration weight on platform and wait for the scale to execute
calibration procedure.
3. The Display shows [ -End- ] when the calibration procedure is completed.
4. Remove the calibration weight from the platform when calibration is completed.
* Note: Calibration weights of 100 g, 1000 g, 1500 g, 2000 g, and 3000 g can also be
used to calibrate the Orion.
Copyright
The operation manual is protected by copyright. All rights reserved. No part of the operation manual may be reproduced,
processed, duplicated or published in any form by photocopying, microfilming, reprinting or any other method, in
particular electronic means, without the written agreement of Acaia.
© Acaia, California, 2018.
Operation
When Unit is displayed, short press Dose to enter Unit menu.
Rotate the dial to toggle between unit options: g (gram) and oZ (ounce).
Short press Dose to confirm.
Operation
Long press Power and rotate the dial to SEt. Press Dose to enter Settings
menu.
When About is displayed, short press Dose to display the firmware
version.
11