acaia ORION BEAN DOSER Посібник з експлуатації - Сторінка 5
Переглянути онлайн або завантажити pdf Посібник з експлуатації для Кухонна техніка acaia ORION BEAN DOSER. acaia ORION BEAN DOSER 15 сторінок.
Також для acaia ORION BEAN DOSER: Посібник з експлуатації (11 сторінок)
Друкувати сторінкуChapter 2: Getting Started
2.1 Initial Setup
1. Prior to using your Orion for the first time you should rinse and clean the bean hopper
in warm soapy water. Dry immediately after cleaning.
2. Attach the bean hopper on top.
3. Place a container on the weighing platform to avoid accidental dispensing.
4. Connect the power cord to the Orion.
5. Place coffee beans into the hopper.
2.2 Getting Started
1. Make sure that the weighing platform is clean.
2. Turn on the Orion by pressing Power and place the container on the platform.
3. Set target weight by short pressing Power. Adjust values with Dial then short press
Power to confirm.
4. Press Dose to start dosing. If the display shows [ CUP ] [ rESEt ], please place a
container on the platform.
5. When a dose is complete, press Power to return to dosing.
2.3 General Operation
The Orion is designed for dosing portions of beans from 5 grams to a maximum of 3000
grams per dose with an accuracy of +/- 2 beans (~0.5 g).
There are two dosing modes in the Orion — Manual mode and Auto mode. To choose
between modes, long press the Power button and the display will show the current mode
of operation. Rotate the dial to switch modes.
5