AQC MAXIHYDRO MS-010 Посібник користувача - Сторінка 4

Переглянути онлайн або завантажити pdf Посібник користувача для Пилозбірник AQC MAXIHYDRO MS-010. AQC MAXIHYDRO MS-010 14 сторінок.

3 FEATURES OF THESE SCRUBBERS

Figure 3 shows the water control system. Water pressure of 50 to 60 psi is recommended. The ball

valve water control is always run with the fan, and is always open when the unit is operational. The

filling water valve, which is always closed when the unit is working is used to rapidly fill the unit to

static level.

The water inlet is threaded for convenience in connecting to the main water system. The ball valve

assembly with its float can be seen through the inspection window. The static water level is at the

bottom of the window and this is where you will record the working water level. When the fan is

turned on, the arm of the ball may have to be adjusted to the working water level.

AIR OUTLET

DOWNTIME

BLOWER EXHAUST

OVERFLOW

DRAIN

Note: Air inlet an opposite side.

Figure 1

Wet type dust collector

WATER INLET