AQC MAXIVIBE AMV-450 Посібник користувача - Сторінка 6

Переглянути онлайн або завантажити pdf Посібник користувача для Пилозбірник AQC MAXIVIBE AMV-450. AQC MAXIVIBE AMV-450 20 сторінок.

INSTALLATION

7.1

Inspection of the material

The MAXIVIBE unit is shipped on one (1) or multiple skids. Proceed with a visual inspection upon

receiving the material for any damages or missing skid(s). Note: if damages are apparent upon

receiving the material, indicate so on receiving slip (freight waybill) and confirm by having the

truck driver sign the waybill with any discrepancy. A.Q.C takes photos of material prior to shipping.

Generally, shipment includes a skid for the collector cabinet and another one for the dust storage

system. Other optional devices such as an explosion venting system or flame front damper may

also be shipped on separate skids.

7.2

Area of installation

1 . The area chosen to install the

collector should be able to support

its weight, its accessories, dust

storage system and ventilation

ducting. The construction of a solid

flat surface such as a concrete pad

may be needed.

2. Install the collector in a way to

gain access to the control panel,

the fan/motor assembly, shaker

motor and filter envelope such as

suggested in figure 2.

3 . If there are explosive protective

devices such as explosion vents,

spark detection, no return

valve and abort damper, usure

that instructions and NFPA

requirements are observed.

Shaker type dust collector

Figure 2

Drawing # 2