a-TroniX PPS Solar flex Посібник користувача - Сторінка 5
Переглянути онлайн або завантажити pdf Посібник користувача для Промислове обладнання a-TroniX PPS Solar flex. a-TroniX PPS Solar flex 8 сторінок. Flexible solar module
User Manual
a-TroniX PPS solar flex
Avoid contact of products with corrosive substances such as acids, alkalis
■
and oils as well as with paint and adhesives. Do not place the modules near
places where flammable gases can escape.
Avoid direct sunlight on the back of the module and refrain from artificially
■
amplifying the sunlight on the module (e.g. by mirrors).
Charging a battery is only possible with a charge controller connected (not
■
included in the scope of delivery).
When disconnecting the modules from the solar system, make sure that the
■
charge controller (not included in the scope of delivery) is disconnected from
the power supply on both sides.
CAUTION:
In general, follow the manufacturer's safety instructions during installation and
maintenance and use suitable fall protection when working on the roof.
NOTE:
Check the module surfaces regularly.
Remove heavy soiling such as bird droppings etc. immediately so as not to
impair performance.
Clean the modules with lime-free running water.
Cleaning with a high-pressure cleaner or a washing machine can damage the
modules.
09/2021
Page 5