a-TroniX 9885109 Посібник користувача - Сторінка 4

Переглянути онлайн або завантажити pdf Посібник користувача для PCI карта a-TroniX 9885109. a-TroniX 9885109 7 сторінок.

User manual

a-TroniX SNMP card 1-3 kVA, 6-10 kVA

3. Functions

UPS can be monitored remotely through the network;

■

Support DHCP;

■

Support remote self-test, shutdown and restart UPS functions (UPS support required);

■

Support Web page configuration;

■

Support scheduled tasks (timed self-test, power on/off);

■

Has historical events and historical data storage functions;

■

Remote UPS monitoring and management can be performed through HTTP, SNMP;

■

Complete equipment event handling (including event recording and notification);

■

Can be extended to connect temperature and humidity monitoring modules

■

4. Installation

The card can easily be slid into the adapter slow (INTELLIGENT SLOT) of the UPS and

only has to be connected with an Ethernet cable.

1. To install the a-TroniX SNMP card, switch off the power supply to your UPS.

2. Remove the cover of the intelligent card slot on the back of the UPS and keep the

screws.

3. Slide the card into the open slot and secure it with the screws from step 2.

4. Connect a network cable to the network interface connector of the SNMP card.

5. Switch the power supply of your UPS back on and carry out the configuration.

6. You can find the corresponding software on our homepage.

Page 4

10/2021