Dexeq Video Phone Inspector Посібник користувача - Сторінка 2
Переглянути онлайн або завантажити pdf Посібник користувача для Аналітичні інструменти Dexeq Video Phone Inspector. Dexeq Video Phone Inspector 5 сторінок.
Друкувати сторінку1. It should be handled with care.
2.Avoid dropping, shocks and other mechanical damages of the device.
3.Avoid rapid changes in temperature, high temperature above 50C, Low temperature below -10C, high voltage, static
interference, radiation, and humid.
4.Cannot get wet or be immersed in the liquid.
5.The system uses dangerous voltage for human life. That's why it is necessary to get out the plug from the power line socket
before replacement leds.
Smart charging function: When the device detects the charging line is inserted, it automatically enters the charging mode. The
power indicator will light and USB to DC2.5 power cord. indicates that the device is being charged; when the battery is full, the
three power indicator will lights.
Do not recommend to use the equipment while charging. When the charging line is pulled out, the device will automatically shut
down.
1. When the device is booted up, it will enter the standby state automatically.
2. When the client is automatically or manually connected for the first time , the device automatically wakes up and opens Diffuse
white light into normal check mode.
3. Equipment has a low power prompt function, when the battery power is low, the low light indicator light, please timely Charge
the device; when the battery is too low, the device will automatically shut down.
4. By default, the device does not operate automatically into sleep mode within 2 minutes. 5 minutes after no operation, the device
will automatically shut down. In addition, the user can set the appropriate automatic break.
1234
Sleep time and automatic shutdown time: Automatic sleep time options (7 types): 1 min, 2 min,3 min, 4 min, 5 min, 10 min off,
sleep and not sleep. Automatic shutdown time options (7 types): 1 min , 2 min , 3 min, 4 min, 5 min, 10 min shut down, or no shut
down.
The power indicator : light is lit for 10 seconds, then press and hold the function key "S" until you hear a long "tick" sound. Then
the device's WiFi password will restore into the factory settings . When the recovery is complete , the "tick" sounds again and the
device automatically restarts.
Power and client connection : Press the power button, the power indicator lights up to indicate the current battery status, four keys
flashes and then the "W" key flash, and automatically generates WiFi hotspot when the device is started, wait for the client to
connect to WiFi hotspot and start the client .
Shut down: Press the power button for 2 seconds. Power indicator turns off. Forced restart: press the power button for 10 seconds.