Dexin MWP83-P1M Посібник користувача - Сторінка 8

Переглянути онлайн або завантажити pdf Посібник користувача для Миша. Dexin MWP83-P1M. Dexin MWP83-P1M 10 сторінок. Cordless mouse

You may need to try several times for a location that is best in your operating

environment.

Move the receiver and the mouse closer to each other so that the receiver is

relatively shorter in distance to the mouse than to other 27MHz transmitters.

You may need to re-establish the "connection".

Note: Avoid using this device on a metal surface because a large surface of iron,

aluminum, copper, or other metal may act like a shielding to the RF antenna of the

mouse and the receiver.

3. Interference with other RF wireless mouse

If the interference comes from other same model of RF wireless mice, please

"Setting up connection between mouse and receiver" of the installation guide to

switch to a new RF channel. A new identification code is also generated upon the

completion of channel switching.

Normally, the effective transmission distance is about 3 feet, depending on the

environment. If the effective distance between the mouse and the receiver is bad,

try to change the location of the receiver.

4. If you have difficulty connecting the wireless mouse:

Increase the distance between the set of wireless mouse and other radio device

units.

Turn off the other wireless devices, or their base units that are in close proximity

to the receiver of this wireless mouse.

Try connecting the wireless mouse and its receiver again.

To verify that your device is connected and working properly, open a document

and try the device.

Electromagnetic Characteristics (EMC)

Tested to comply with FCC standards

For home or office use

MWP83-P1M Cordless Mouse

Page 8 of 10

1.0 Edition