Aqua Computer Aquaduct 240 eco Посібник з експлуатації та монтажу - Сторінка 17

Переглянути онлайн або завантажити pdf Посібник з експлуатації та монтажу для Комп'ютерне обладнання Aqua Computer Aquaduct 240 eco. Aqua Computer Aquaduct 240 eco 20 сторінок. Aquaduct eco series

9. Initial operation

9. Initial operation
9. Initial operation
9. Initial operation
As the last step, fill your aquaduct with the supplied Double Protect Ultra
coolant.
Caution: Disconnect all PC components from the power supply during
Caution
Caution
Caution
the whole filling process! Do not start the PC until you have made sure
that there are no water leakages! If you do not feel capable of doing
this work yourself, charge an expert with the assembly and initial oper-
ation!
Caution
Caution: Make sure once again that your electrical outlet is protected
Caution
Caution
: Make sure once again that your electrical outlet is protected
: Make sure once again that your electrical outlet is protected
: Make sure once again that your electrical outlet is protected
with a FI circuit breaker!
with a FI circuit breaker!
with a FI circuit breaker!
with a FI circuit breaker!
If this is the case, you may proceed to put the aquaduct into operation.
After you have connected your water cooling blocks (not contained in
the scope of delivery) with the aquaduct, you can fill the aquaduct.
For filling the aquaduct, open filling screw in the top of the device. Fill
the right profile of the aquaduct with the Double Protect Ultra coolant
supplied with the aquaduct.
If the profile is filled almost up to the upper edge, you can start the
aquaduct by
establishing the power
turned off during the complete filling process since no sufficient cooling
turned off during the complete filling process since no sufficient cooling
turned off during the complete filling process since no sufficient cooling
turned off during the complete filling process since no sufficient cooling
function is guaranteed yet!
function is guaranteed yet!
function is guaranteed yet!
function is guaranteed yet!
To power the pump of the aquaduct 240 eco AC 230 V, plug in the
mains plug to an empty wall outlet.
With all models with an integrated 12 V pump, an adapter is included
which enables you to start the power supply unit of your PC without con-
necting the motherboard.
First turn off your PC power supply or remove the main PSU cable if no
power switch is present. Remove all cables of the PSU (e.g. from non re-
movable disks, optical storage drives or graphic cards). Take special
care to disconnect the 4-pin or 8-pin ATX12V power supply connector
from the motherboard as well. Connect the aquaduct using the fif-
© 2007-2016
Aqua Computer GmbH & Co. KG
Gelliehäuser Str. 1, 37130 Gleichen, Germany
AQUADUCT ECO
supply. The computer must be
he computer must be
he computer must be
he computer must be
- 17 -