Aqua Computer Aquaduct 360 eco Посібник з експлуатації та монтажу - Сторінка 8

Переглянути онлайн або завантажити pdf Посібник з експлуатації та монтажу для Комп'ютерне обладнання Aqua Computer Aquaduct 360 eco. Aqua Computer Aquaduct 360 eco 20 сторінок. Aquaduct eco series

Друкувати сторінку

AQUADUCT ECO

- this manual

3.3. aquaduct 360 eco mark II/aquaduct 360 eco+ mark II

- aquaduct 360 eco mark II/aquaduct 360 eco+ mark II

- 2 pcs. straight connector plug&cool G1/4"

- hexagon socket wrench

- dual PUR tube blue/black approx. 2,5 m

- PC circuit board

- USB cable approx. 2 m

- 15-pin aquaduct connection cable approx. 2 m

- ATX starter

- cable for rpm signal

- 1000 ml Double Protect Ultra coolant

- this manual

3.4. Optional accessory for aquaduct 360 eco+ mark II

- connection cable for flow sensor (order code 53027)

- flow sensor (order code 53061)

- flow sensor "high flow" (order code 53068)

4. Arranging the elements of the cooling system

On arranging the elements of the cooling system you should observe

the following essential points:

• All elements have to be flown through sequentially one after the

other. A parallel assembly must not be carried out, since the al-

location of the water in the different hoses can hardly be pre-

dicted and single components could possibly not sufficiently be

cooled or even not at all.

• The components can be in any order you like. This has (almost)

no influence on the cooling performance. Additionally it is worth

mentioning, that the difference in temperature of the coolant

between the in- and outgoing line of the radiator is about 1-2

°C in an average system, meaning that the water just heats up

about 1-2 °C while flowing through all the coolers.

- 8 -

Aqua Computer GmbH & Co. KG

Gelliehäuser Str. 1, 37130 Gleichen