AVLink HS-2328FS Посібник користувача - Сторінка 2

Переглянути онлайн або завантажити pdf Посібник користувача для Підсилювач AVLink HS-2328FS. AVLink HS-2328FS 2 сторінки. Hdmi distribution amplifier

Installation

1. Turn off the DVD player/TV receiver and monitors.

2. Connect the HDMI male extension cable between the

DVD player/TV receiver and the "HDMI In" port of

Distribution Amplifier.

3. Connect the HDMI male/female extension cables

between the monitors and the "HDMI Out" ports of

Distribution Amplifier.

4. Connect the power cord and turn on the Distribution

Amplifier.

5. Turn on the DVD player/TV receiver and monitors.

Note:

Have to install all TVs with the same resolution limited.

We suggest user connect TV from "HDMI Out 1" first.

Because Distribution Amplifier will simulation EDID from

"HDMI Out 1".

We suggest user connect source equipment to

Distribution Amplifier by 1.8M cable for better video

quality.

Operation for cascade:

1. The function to display identical image on more

monitors, you have to attach another Distribution

Amplifier.

2. Connect the HDMI male/female extension cable

between the former Distribution Amplifier of the "HDMI

Out 1" port and the latter Distribution Amplifier of the

"HDMI In" port.

Note:

Even though you are allowed to cascade the Distribution

Amplifier with varied ports, the image might become

unstable if cascade too many tiers of Distribution Amplifier.

-3-

P.S.: The example cascades the 2 and 4 ports Distribution

Amplifier; however, you can cascade the HDMI Distribution

Amplifier with demanded port.

Trademarks:

All the companies, brand names, and product names

referred to this manual are the trademarks or

registered trademarks belonging to their respective

companies.

-4-