Aqua Creek F-105LAR Інструкція - Сторінка 3

Переглянути онлайн або завантажити pdf Інструкція для Підйомні системи Aqua Creek F-105LAR. Aqua Creek F-105LAR 3 сторінки. Pull-out legrest

3. Orient the pull-out legrest as shown below and slide the PLASTIC GUIDE/SPACER into the chair

support tube. Tap the PLASTIC GUIDE/SPACER with a hammer or mallet until fl ush with the end

of the support tube. The threaded hole in the bottom of the PLASTIC GUIDE/SPACER should line-up

with the hole drilled in STEP 2. Install the lock washer and 1/4 -20 x 1/2" cap screw from underneath and

tighten until snug.

PLASTIC GUIDE/SPACER

The PULL-OUT LEGREST is now ready to use. However, before using, slide the legrest in and out, and put

the pad up and down to make sure everything works smoothly.

LEGREST STOWED

1" SQ. TUBE

CHAIR SUPPORT TUBE

PULL-OUT LEGREST

PLASTIC GUIDE/SPACER

FLUSH WITH 2" SQ. TUBE

PULL LEGREST OUT

SLIDE FORWARD AND INSERT PIN TO LOCK IN "UP" POSITION

1/4" LOCK WASHER, SS

1/4-20 X 1/2" CAP SCREW, SS

FLIP LEGREST UP AND PIN

SLOT

Revised 12/13/16