Dexter Laundry T-1450 Інструкція з програмування
Переглянути онлайн або завантажити pdf Інструкція з програмування для Пральна машина Dexter Laundry T-1450. Dexter Laundry T-1450 7 сторінок. Opl programming v-series
Друкувати сторінку
OPL PROGRAMMING V-SERIES
TWO WAYS TO MODIFY PROGRAMMING OF THE V-SERIES
PREPROGRAMMED FORMULAS
#1
Programming can be accomplished manually using the machine controls or by connecting to
the machine control using a PDA (personal digital assistant). For instructions on using a PDA
with this washer control, please contact your local Dexter distributor.
The keypad layout for the washer control is shown above.
#2
Manual Wash Cycle Programming Instructions
1.
Turn on the power to the washer.
2.
Turn the Run/Program key to the Program position. Display will show "C O" and the
"ADD BLEACH" will blink and will continue to blink during the programming mode.
3.
Press the "DOWN" or "UP" buttons to select which cycle to alter. When the desired
cycle number is displayed, press "START".
4.
The display should now show a "b". The "b" and the cycle indicator lights indicate
which bath is being selected to alter. Press the "UP" and "DOWN" buttons to select a
bath to change and then press "START". The indicator lights are shown below.
FLUSH
When "RINSE" is selected, "b r1" through "b r4" may be selected. There may be
multiple rinses that are indicated by r1, r2, r3 and r4.
PRE
WASH
WASH
OPL
SIX (6)
FINAL
RINSE
RINSE
SPIN