Aqua Creek F-004PLB-23 Посібник з монтажу та експлуатації - Сторінка 5

Переглянути онлайн або завантажити pdf Посібник з монтажу та експлуатації для Фітнес-обладнання Aqua Creek F-004PLB-23. Aqua Creek F-004PLB-23 17 сторінок. Pro pool lifttm extended base

Друкувати сторінку

PRO POOL LIFT - ASSEMBLY INSTRUCTIONS

Attach Seat belt to the seat as shown.

Install the PRO POOL LIFT

(4) anchors using the supplied 1/2 x 1-1 / 2 "

stainless steel hex-head bolts and 1/2"

stainless steel flat washers. Make sure all

bolts are tight before using the lift.

Plug the handset cable into the large handset

socket on the bottom of the control box. Be

sure you press the cord end firmly into the

socket until you are sure it is all of the way

into the socket. Failure to fully push the

remote cord into the socket may result in

faulty or interrupted operation.

Before installing the battery, place it on the

charging unit and let it charge for 24 hours.

Ma k e s u r e t h e o r a n g e " c h a r g e " l i g h t

illuminates when the battery is being

charged.

Remove the fully-charged battery from the

charger and install it on top of the Control

Box. The battery will line up square with the

c o n t r o l b o x , a n d w i l l ' c l i c k ' w h e n i t l o c k s i n

place properly. The lift will only operate

when the battery is mounted properly.

DO NOT LEAVE THE BATTERY ON

THE LIFT! WHEN NOT IN USE

STORE THE BATTERY ON THE

CHARGER.

onto the four