Aqua Creek F-TWPB Посібник - Сторінка 7

Переглянути онлайн або завантажити pdf Посібник для Медичне обладнання Aqua Creek F-TWPB. Aqua Creek F-TWPB 15 сторінок. Available in pink, green or yellow patent pending 300 lb. (136 kg) maximum weight capacity
Також для Aqua Creek F-TWPB: Інструкція з монтажу Посібник з монтажу (14 сторінок)

The Tidalwave Pool Bike was designed for use in and out of the water. To use in water, use the wheels at
the front of the bike to roll the bike down the pool wall into the water. Optimal water depth is 3-5 feet
(0.9 to 1.5 meters). See FIG. 9 & FIG. 10 below.
FIGURE 9
The Tidalwave pool bike comes with multiple levels of resistance, similar to a stationary bike. The
resistance adjustment knob is located on the main frame. To increase resistance for a harder workout,
turn the knob clockwise. To decrease resistance, turn the knob counter-clockwise. See FIG. 11 and
FIG. 12 below.
NOTE: Always begin pedaling on the easiest level and increase resistance to more diffi cult settings
while pedaling. Never start pedaling at high resistance as you may experience a transmission bind
up. However, if this does occur, release the resistance back to easy and begin again.
RESISTANCE
ADJUSTMENT
ROD
Copyright © 2016 Aqua Creek Products All Rights Reserved
Tidalwave Operating Instructions
PLACE IN WATER
RESISTANCE
ADJUSTMENT
KNOB
FIGURE 11
FIGURE 10
ROTATE TO
INCREASE
RESISTANCE
*Frame not shown for clarity
ROTATE TO
DECREASE
RESISTANCE
FIGURE 12
7
Revised 5/10/16