AVM INSPIRATION CS 2.2 Інструкція з експлуатації Посібник з експлуатації - Сторінка 13

Переглянути онлайн або завантажити pdf Інструкція з експлуатації Посібник з експлуатації для Підсилювач AVM INSPIRATION CS 2.2. AVM INSPIRATION CS 2.2 20 сторінок. Compact streaming cd-receiver

Друкувати сторінку

Set the input where the main channels of the surround system are connected to fixed gain. When this

input is selected, tone controls are bypassed, balance is set to neutral position and the gain is on a

fixed level independently of the volume setting on the other inputs.

3.18 FM auto store

This function is useful when storing a large quantity of stations from cable. Please note that the

stations are stored including the actual tuner setting (see 3.2-3.6). For cable we recommend: RDS-

display = name, scanmode = auto, 2-ch mode = stereo, bandwidth = narrow, sensitivity = local.

Once the tuner parameters are set in the desired way enter the personal setup and select "FM auto

store". Then press the button START (4). While the auto store function is in progress all stations are

played audibly for half a second. When the function is terminated the display shows for 2 seconds the

number if stations found. Then the unit comes back to normal tuner operating mode.

If desired you can now shift certain stations to different positions, change the settings and store back

or delete unwanted stations (see 2.4.2).

3.19 Set autoplay

When AUTOPLAY is ON, the CD player will start playing automatically every time a new CD is inserted.

If AUTOPLAY is OFF, the player will read the TOC of the inserted disc and then go to STOP mode.

3.20 Reset

This function cancels certain or all settings and makes the unit return to default settings.

To perform the reset switch the unit to standby (power button (1)). Then press and hold the middle key

(6) under the display (3). While holding that key switch the unit on (power button (1)). The display now

will show the reset menu.

Select if you want to clear the station memory ("STAT"), the input names ("NAME") or reset the unit

completely ("ALL").

"CANCEL" will bring the unit back to normal operating mode without resetting any item.