AVM INSPIRATION CS 2.2 Інструкція з експлуатації Посібник з експлуатації - Сторінка 11

Переглянути онлайн або завантажити pdf Інструкція з експлуатації Посібник з експлуатації для Автомобільний приймач AVM INSPIRATION CS 2.2. AVM INSPIRATION CS 2.2 20 сторінок. Compact streaming cd-receiver

Друкувати сторінку

NOTE: Depending on actual setting the threshold for auto tuning will change (sensitive in MONO, less

sensitive in STEREO).

3.5 Bandwidth

Tuner must be selected as source

Select bandwidth "narrow" / "wide" for best reception.

3.6 Sensitivity

Tuner must be selected as source

Choose between "local" (in case the tuner operates from a cable) and "distant" (if operated from

antenna).

3.7 tone control

Set tone control to "bypass" (= linear) or "active". In case the tone control is activated "TONE ON" is

shown in the display (4), otherwise "LINEAR".

You can choose if you want to change bass and treble settings simultaneously for all inputs ("global")

or especially for the actual input ("individual"). See 10.1.6

The loudness function depends on speakers and properties of the listening room and is therefore

always "global".

NOTE: In case tone control is set to "bypass" the menu will skip the bass, treble, and loudness

settings (see 3.8-3.10).

3.8 set bass

Set bass level between – 5 dB and + 9 dB.

3.9 set treble

Set treble level between – 7 dB and + 7 dB.

3.10 set loudness

If you listen to music at low levels, you often recognize that bass and treble reproduction are weak.

This is because the human ear is not sensitive to bass and treble at low sound levels. To compensate

this you can use the parametric loudness function of the CS 2.2. This function will increase bass and

treble levels when you decrease the volume. When the volume is increased the frequency response will

be more and more flat and remain linear at high volume levels. In order to obtain best results you have

to proceed in the following way:

Set the amplifier to a moderate volume level. Using the buttons ! VALUE" (7, 8) choose in the

loudness menu a curve ("of" and 1 to 9) which gives best sound impression and exit the menu (button

EXIT (6)).

NOTE: The loudness function selects automatically the correct curve depending on actual volume

setting. So if you change volume a different curve than previously selected may be shown in the

loudness menu. This is not a malfunction.