Fencee mini DUO MD10 Посібник користувача - Сторінка 6

Переглянути онлайн або завантажити pdf Посібник користувача для Джерело живлення Fencee mini DUO MD10. Fencee mini DUO MD10 16 сторінок.

5. INTRODUCTION

fencee energizers mini DUO MD are suitable for short and vegetation unburdened fences.

Thanks to their power they can secure sufficient tension along the entire length. An

integrated microprocessor operates the whole operation and he secures optimal power, due

to the condition of the fence system.

Combined energizers fencee mini DUO MD can be powered from mains 230 V, with use of

enclosed 14 V adapter or by suitable 12 V battery. Energizer can be runned only on one of the

listed power sources. Not on both at the same time.

During the operation of the fence, there is a continuous measurement of the fence load.

The output power of the fencee mini DUO MD is then automatically adjusted to maintain

the desired output voltage over the largest possible load range. This regulation significantly

helps to save energy during using a quality fence with a low load. The LED indicator on the

front side of the energizer shows the operation of the source and also signals a possible fault

on the energizer.

The energizers fencee mini DUO MD offer a special Power save mode. You can switch the

energizer to a slower mode, the frequency of the pulses will be approximately twice as long,

and thanks to this you will significantly save the battery. It is convenient to use for example,

when the animals are used to the energizer and respect it. Thanks to this mode, the energizer

can run on the battery for almost twice longer.

Connector for connecting adapter ( 14 V /1A) or battery (12 V)

LED control of connecting energizer and status indication

ON / OFF switch button

Earthing (black)

Connection to fence system (red)

Explanations of symbols shown on energizer

Earthing connection. Connect this connection to your earthing system.

Fence output with full voltage. Connect this connection to your fence system.