Fencee power DUO PD30 Інструкція з використання Посібник з використання - Сторінка 10

Переглянути онлайн або завантажити pdf Інструкція з використання Посібник з використання для Джерело живлення Fencee power DUO PD30. Fencee power DUO PD30 20 сторінок.

Друкувати сторінку

• Energizers must be installed in a dry place.

• Never put energizer on ground – in moist or wet environment.

• Fasten energizer by means of hanging screw or DIN rail with mounting

• Never expose energizer to continuous water stream.

ON THE GROUND – IN A PUDDLE

Earthing

Correct earthing is very important because total function of the fence system is depen-

dent on it!

Beat earthing rod with corrosion protection into ground completely at place with maximum

and permanent humidity. On dry pieces of land or in case of soils with lower electric condu-

ctivity, use one or several supplementary earthing rods (with length of minimum of 1 m) and

place them at distance of approximately 3 metres from each other.

Exceptions are fence system powered by battery energizer or working with low output. Here

minimum length of earthing rod of 50 cm is recommended.

Distance of at least 10 metres must be between earthing rod of fence system and another

earthing system, for example earthing of a house, protective earthing of electric supply system

or earthing of violation alarm.

Do not connect the energizer to already existing earthing.

bracket in vertical position – at least 20 cm above ground.

VERTICAL ON THE

WALL IDEALLY

WITH A CANOPY

We recommend

mounting on DIN rail

80 mm (Art.Nr. 8043)

NEVER EXPOSE TO

A CONTINUOUS

STREAM OF WATER!

ON THE GROUND – UPSIDE DOWN

NEGATIVE

ANGLE