Fencee MX10 Посібник користувача - Сторінка 4

Переглянути онлайн або завантажити pdf Посібник користувача для Монітор Fencee MX10. Fencee MX10 16 сторінок. Remote monitoring of fence parameters
Також для Fencee MX10: Посібник користувача (16 сторінок)

Друкувати сторінку

5. DESCRIPTION OF THE DEVICE

• The Monitor MX10 is used to measure voltage anywhere in your fence system.

• Up to 6 MX Control Monitors can be paired on one Gateway and thus divide the fence

system into several zones. Everything then communicates with the central Gateway and

the energizer of the fencee power DUO RF PDX series (it is not part of the Monitor package).

• Using radio frequency technology, it transmits the measured data wirelessly to the central

Gateway, where the values are shown on the display.

• In the event of a voltage drop at the measured point below the set limit, an alarm is sent

and signalling to the Gateway immediately notifies the user of the fault.

Earthing connector

LED diode

Figure 1: Description of the device

SMA connector for

antenna connection

Magnetic target

Connector for

connection to the fence