AB Quality 2727-G7P20D1P5 Посібник із швидкого старту - Сторінка 20

Переглянути онлайн або завантажити pdf Посібник із швидкого старту для Сенсорні термінали AB Quality 2727-G7P20D1P5. AB Quality 2727-G7P20D1P5 20 сторінок.

Друкувати сторінку

MobileView Guard G750

The following illustration shows what the connection area of the MobileView

terminal looks like with the back cover removed.

RS-232 Port

for downloading software.

Main connector (S19)

for power supply and

control lines

Important: Install plug on

unused MobileView

Connection Cable outlet.

Relocating MobileView Connection Cable

The MobileView Connection Cable can be attached on the right or left side of the

terminal for right or left-hand operation. To relocate the cable, simply grasp the

strain relief and/or the plug and slide off of mount with a rocking motion.

Attaching Cable on Right

Avoid routing cable

over T-support.

Important: Make sure the K3, 11-pin female connector clicks completely into S19, Main Connector when

plugged in. Ensure proper seating of K2, 8-pin RJ-45 jack into S4, Ethernet Connector. Avoid routing the

cable over the T-supports. After routing the cable, secure the back cover to the terminal with the 6 screws.

Tighten screws to a torque of 4.42 In-lbs to maintain IP54 degree protection.

Publication 2727-QS002E-MU-P

Reset Button

for rebooting Windows CE.

All data not flushed to Registry or

saved to Flash Storage is lost.

pin 1

Ser i al

por t

R eset

S19

00: 60: B5: 06: 00: 01

Position of switches does not

affect terminal operation (for

future use)

Ethernet connector (S4)

for data exchange

Connector

S4, Ethernet Connector

Ethernet Label

Ethernet (Mac) Address

AABBC C D D EEFF

2250- 00001

Connector (not used)

Strain Relief

for connecting MobileView

Connection Cable (on left or right side)

Attaching Cable on Left

S19

Main

Cable Tag

Allows the terminal to

be uniquely identified.

Avoid routing cable

over T-support.