AB Quality 22-COMM-E Примітки до випуску продукту - Сторінка 4

Переглянути онлайн або завантажити pdf Примітки до випуску продукту для Адаптер AB Quality 22-COMM-E. AB Quality 22-COMM-E 8 сторінок. Ethernet/ip adapter

Друкувати сторінку

22-COMM-E EtherNet/IP Adapter Firmware v1.007

Step 2

Firmware Flashing

Using DriveExecutive

1. Launch DriveExecutive and go online with the drive that is connected to

the adapter.

2. In the DriveExecutive treeview, click on 22-COMM-E as shown in

Figure

3. Click the information icon to display the adapter's Properties screen.

4. The "Revision:" field shows the present revision (for example, 1.006) of

the adapter firmware.

Figure 2 Information Icon in DriveExecutive Window

Step 4

This section describes procedures to flash upgrade your adapter firmware.

Flash kits for drives, communications adapters, and peripherals are provided

on the Allen-Bradley Web Updates site located at

support/abdrives/webupdate.

ATTENTION: Risk of permanent equipment damage exists. Once a flash

update has been started, do not remove power from the drive (or the

22-XCOMM-DC-BASE External Comms Kit, if used) until after the

download has completed and the MOD status indicator on the adapter

becomes FLASHING GREEN. If power is removed before this occurs, the

adapter may be permanently damaged. An adapter that has been damaged

in this way cannot be repaired.

Step 3

http://www.ab.com/