AB Rocket Twister Інструкція з монтажу

Переглянути онлайн або завантажити pdf Інструкція з монтажу для Фітнес-обладнання AB Rocket Twister. AB Rocket Twister 2 сторінки.

SEAT SWIVEL

The seat is designed so it can swivel in both

directions while exercising.

1. See Illustration 6A. If the exercise

requires the seat to swivel, simply pull up

the Pin and remove it.

2. See Illustration 6B. The seat will swing in

both directions.

3. If you need to secure the seat, move it to

its original (straight) position so both openings

of the right grip handle and seat are

lined up and insert the pin in.

CLICKER

The Ab Rocket Twister is equipped

with the Clicker located on the back

of the right back support metal bar.

When you complete a full ab crunch,

you will hear a click.

If you would like to remove the click

feature, see Illustration 7. Using the

screwdriver, remove both screws and

the clicker bracket. Now you will no

longer hear a click while doing

crunches.

STORAGE

For easy storage under the bed, simply remove both top Screw Tops by rotating them

counterclockwise, see Illustration 2 . Leave the bottom Screw Top attached. Bring the

Resistance Springs down, replace the Screw Tops. Bring down the Padded Back

Support. Both Grip Handles can be removed (if needed) for easy storage. Just press

the Spring Pins on both Grip Handles and remove them.

CUSTOMER SERVICE 1-800-423-4248

AB ROCKET TWISTER™ STYLE#: 8332

AB ROCKET™ and AB ROCKET TWISTER™ are trademarks of EMSON®

BACK OF UNIT (RIGHT SIDE)

CLICKER BRACKET

ASSEMBLY INSTRUCTIONS