AB Slotsport AB OG12 Посібник із швидкого старту

Переглянути онлайн або завантажити pdf Посібник із швидкого старту для Іграшкова машинка на колесах AB Slotsport AB OG12. AB Slotsport AB OG12 3 сторінки.

Друкувати сторінку

Dedicated to supplying the best Slot Racing Products to Racers Worldwide

3 St James Terrace, Riding Mill, Northumberland, NE44 6ED England

Telephone 0044 (0) 1434-682475 - e-mail [email protected]

BUILDING THE AB OG12 / Pro-Am CHASSIS

Thank you for purchasing the AB OG12 chassis. This chassis has undergone much development and we are

sure you will find this great chassis competitive and strong if you build it correctly.

Firstly lets take a look at the components. Using a dremel, take care cutting the components and trimming off

burrs from cut edges. Please read the instructions all the way through before picking up your tools!

We recommend AB Chassis Solder and flux to assemble this kit.

Front wheel

mount and pan

upstop plate

lock. x2

Front upstop &

front pan upstop

plate.x 2

Guide plate &

Guide spacer

plate.

Front & centre

Centre spine

mounts

Note;- You will find 3 different "rail options" for this

chassis, all of which are easily changed when finding

which set up is good for your track. You can go -

1) Single 0.032" rails

2) Single 0.042" rails, or

3) Twin 0.032" rails without having to modify the cuts in

the chassis frame, just the wire and tube you use, so

read the instruction sheet in full before you start

building to ensure you understand your options!

Generally for "scale" type track you may find the twin

0.032" rail option best.

web sites - www.abslotsport.biz - www.abslotsport.com

SKYPE - abslotsport

Pin tube mounts x 4

Pan Straps x 4

U.K. V.A.T. No. 910 9584 18

Motor box overlay

Pan cross bar

retainer

When trimming

components ensure

to only trim joining

sprags and not the

components

themselves

Front pan Upstops

X 2

Centre spine

rear mount &

motor box over-

lay front key