DeZurik P41 Інструкція - Сторінка 8

Переглянути онлайн або завантажити pdf Інструкція для Позиціонери клапанів DeZurik P41. DeZurik P41 11 сторінок. Pmv positioners

Друкувати сторінку
DeZURIK
Adjustments
(continued)

Gain Adjustment

The gain adjustment is preset at the factory to match
your actuator under average conditions. Table A lists
the factory presets.
If it is necessary to adjust the gain,
follow the appropriate procedure:
TO REDUCE GAIN - Move the gain spring away from
the force coil. Ensure the spring is securely hooked in
the beam holes and balance arm notches.
TO INCREASE GAIN - Move the gain spring toward
the force coil. Ensure the spring is securely hooked in
the beam holes and balance arm notches.
Note: After adjusting the gain, you must readjust the zero
and range settings.
D10112
Table A: Gain Spring Position
Settings
Actuator
G2C6
R1C4
R1C6
R2C6
DR40
G4C8
R2C8
G6C4
G6C6
G6C8
G12C6
G12C8
G12C10
R3C8
R3C10
DR55/85
DR145/250
Page 8
Spring Position
Lowest Setting
Second from Lowest
Setting
Middle Setting
Highest Setting
August 2012