Aqua Lung 63093 Посібник користувача - Сторінка 6

Переглянути онлайн або завантажити pdf Посібник користувача для Водолазний інструмент Aqua Lung 63093. Aqua Lung 63093 8 сторінок. Slt neck & wrist seal

Друкувати сторінку

ATTACHING TO THE PU-RING

1. Now it is time to mount the Oval Stiff Ring with seal into the PU-Ring on the drysuit.

Read the step by step instructions carefully so as not to damage the seal or mismatch

the rings.

2. Keep the seal in a fixed grip and rest the Oval Stiff Ring firmly against your hand,

while pressing the rings together. This will prevent the seal from slipping out of position.

3. Squeeze the two rings together, making sure that the seal does not slide out of

position.

4. If the seal slips out of the groove, it will almost certainly be squashed between the

rings. If this happens, detach and restart from step 1 of the section "Mounting the Wrist

Seal". Check the seal for damage.

5. Make sure the Oval Stiff Ring is bottomed out and that the ring flange is in the

position shown in the image. Before diving, you should check that the Oval Stiff Ring

and seal have been fixed in the correct position. Grab the seal with one hand and try to

pull it in the opposite direction from the suit without using excessive force. If everything

feels okay, perform a test dive. If not okay, refer to steps 3 & 4 of the section "Mounting

the Wrist Seal".

*These are suggested instructions only. Whatever method is chosen, be certain the

cuff seal is properly treated. Always make a leak and stress test on your drysuit seals

before diving.

ENGLISH