Avocent LCD15 Посібник зі швидкого встановлення - Сторінка 2
Переглянути онлайн або завантажити pdf Посібник зі швидкого встановлення для Стелажі та підставки Avocent LCD15. Avocent LCD15 2 сторінки. 15/17 lcd tray
Також для Avocent LCD15: Технічна специфікація (2 сторінок)
Друкувати сторінку
15/17 LCD Tray
QUICK INSTALLATION GUIDE
Keyboard Controls
The 15/17 LCD Tray keyboard with integrated pointing
device is designed for use with any USB, PS/2 or
compatible computer. Both the pointing device and
keyboard use the host computer's operating system
generic software drivers and therefore do not require
custom software drivers to be installed on the host
computer prior to use.
Numeric Keypad
The number keys and letter keys share space on the
keyboard. To activate the numeric keypad, press the
Num Lock key to turn on the Num LED. With the Num
LED activated, simultaneously press the Fn key and the
desired number key. For example, press Fn + O to type
the number 6.
Both the Fn LED and the Num LED must be lit in order for
the numeric keypad to operate.
For longer numeric entries, press Fn + F11 to initiate a
continuously active numeric keypad.
LCD Controls
Description
Turns the 15/17 LCD Tray
on or off. A green LED in-
dicates normal operation.
Auto
Auto-synchronizes and
scales down display to
factory presets.
Exit
Exits the OSD or returns
to previous menu.
Right arrow
Selects the function to be
adjusted and increases
values of settings.
Left arrow
Decreases values of
settings.
Controls the brightness of
backlight lamps without
using the OSD menu.
Menu
Displays the OSD menu
and moves selector on the
OSD menu.
Technical support and software or firmware updates:
Product manuals:
www.avocent.com/manuals
Avocent and the Avocent logo are registered trademarks of Avocent Corporation or its affiliates in the U.S. and other countries. All other marks are the property of their respective owners. ©2008 Avocent Corporation.
LCD TRAY SAFETY AND
EMC NOTIFICATIONS
USA
WARNING: Changes or modifications to this unit not
expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to
comply with the limits for a Class A digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference
when the equipment is operated in a commercial environ-
ment. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful
interference in which case the user will be required to
correct the interference at his own expense.
Japanese Approval
Safety and EMC Approvals and Markings
BSMI, CCC, CE, C-TICK, FCC, GOST, TUV/INNOVA,
KCC, UL, ULC, VCCI
Safety Precautions
Certifications for this product are obtained under one or
more of the following designations: CMN (Certification
Model Number), MPN (Manufacturer's Part Number) or
Sales Level Model designation. The designation that is
referenced in the certifications reports and/or certificates
are printed on the label applied to this product.
DANGEROUS VOLTAGE
This symbol is intended to alert the user to the
presence of uninsulated dangerous voltage
within the product's enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to
persons. Never remove a cover on a power supply or any
part that has this label attached.
NOTE: The AC inlet is the main power disconnect.
www.avocent.com
INSTRUCTIONS
This symbol is intended to alert the user to the
presence of important operating and maintenance
(servicing) instructions.
WARNING: To reduce the risk of electric shock or damage
to your equipment:
– Do not connect or disconnect any cables or perform
installation, maintenance, or reconfiguration of this
product during an electrical storm.
– Connect all power cords to a properly wired and
grounded electrical outlet.
– Connect any equipment that will be attached to this
product to properly wired outlets.
– When possible, only use one hand to connect or
disconnect signal cables.
– Never turn on any equipment when there is evidence
of fire, water, or structural damage.
– Disconnect the attached power cords, networks,
telecommunications systems and modems before you
open the device covers, unless instructed otherwise in
the installation and configuration procedures.
Rack and Wall Mount Safety Considerations
• Elevated Ambient Temperature: If installed in a closed
rack assembly, the operation temperature of the
rack environment may be greater than room ambient.
Use care not to exceed the rated maximum ambient
temperature of the appliance.
• Reduced Air Flow: Installation of the equipment in
a rack should be such that the amount of airflow
required for safe operation of the equipment is not
compromised.
• Mechanical Loading: Mounting of the equipment in the
rack should be such that a hazardous condition is not
achieved due to uneven mechanical loading.
• Circuit Overloading: Consideration should be given
to the connection of the equipment to the supply
circuit and the effect that overloading of circuits
might have on overcurrent protection and supply
wiring. Consider equipment nameplate ratings for
maximum current.
• Reliable Earthing: Reliable earthing of rack mounted
equipment should be maintained. Pay particular
attention to supply connections other than direct
connections to the branch circuit (for example, use of
power strips).
590-896-501B