Aqua Medic Nitratreductor NR Blue Посібник з експлуатації - Сторінка 8
Переглянути онлайн або завантажити pdf Посібник з експлуатації для Акваріуми Aqua Medic Nitratreductor NR Blue. Aqua Medic Nitratreductor NR Blue 18 сторінок.
Друкувати сторінку
1. Product description
The Aqua Medic Nitratreductor NR Blue consists of the following parts:
- Reaction vessel (height: 35 cm, volume approx. 5 l)
- Drip counter (14)
The water in- and outflow, the injection port for CO
The reaction vessel is filled with Aqua Medic Miniballs and Mini-Deniballs. The circulation pumpe
is placed in the top of the filter (pump having a capacity of 600 l/h). One tin with Denimar powder
to feed the bacteria is included in delivery.
Available spare parts: Please refer to www.aqua-medic.de.
2. Working principle of the Nitratereductor
In the Aqua Medic Nitratereductor NR Blue the water is treated anaerobically. In the absence of
oxygen, many bacteria are able to use nitrate as a substitute for oxygen for their metabolism.
The oxygen is used for the metabolism, the nitrogen is excreted into the water. Nitrogen gas is a
natural compound of the water and totally harmless. It is, however, necessary to increase the
metabolism of the bacteria so that they can reduce enough nitrate. For this reason, the nitrate
removing bacteria have to be fed. This food contains organic substances that can be used
completely by the bacteria. The only waste product is CO
In the Nitratereductor NR Blue either Denimar or Mini-Deniballs can be used for feeding.
The flow rate through the Nitratereductor is very slow. This is the main difference to other
aquarium filters where the water is often treated once per hour or even more often. The water in
the Nitratereductor should have a retention time of 4 hours. If the filter is adjusted correctly, the
water leaves the filter nearly free of nitrite and nitrate.
8
and the circulation pump are placed in the lid.
2
1. Filter housing
2. Filter basket
3. Handle for filter basket
4. Round grid
5. Rubber sealing for pressure pipe
6. Lid incl. pump and plug
7. Housing's sealing
8. Cap for pump housing
9. Reducing nozzle
10. Water inlet 6 mm
11. CO
-connection 6 mm
2
12. Water outlet 6 mm
13. T-piece for water inlet (no picture)
14. Retaining plate incl. bracket and
drip counter (no picture)
15. 6-mm-connecting hose (no
picture)
16. Sealing clamp
17. Clip for sealing clamp
18. Trim
19. Rubber foot
20. Screw for rubber foot
21. Bottom plate
22. Sealing ring for PG 13,5 sealing cap
23. Sealing cap PG 13,5
24. Port with thread PG 13,5 for ph-
probe (probe not included)
.
2