Avol ARC-U1 Інструкція з експлуатації - Сторінка 5
Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Універсальний пульт дистанційного керування Avol ARC-U1. Avol ARC-U1 9 сторінок.
Друкувати сторінку
AVOL Universal Remote Controller
3.
When the current device has some action (such as TV is power off), release the two buttons what
you pressed and saved the code by pressing "SET" button to exit the searching status. The
indicator light will turn off.
Attn：
To change the direction of search by pressing [LEFT] or
process(the current device indicator will flash two times when changing direction) .
There is no action when pressing buttons except [SET]、[OK] 、[ENTER] or device buttons during
search period.
The search field can circuit infinitely.
The current device indicators will flash by four times after a whole search, and then will exit search
without saving the codes.
V. Quick Search
1.
Press and hold the corresponding set button(if you want to set up the device of TV, then press "TV"
button as set button,) until the current device indicator light lights(about 3secs), then release the
current device button. [Or press "SET" button + the corresponding device button at the same
time, or example, TV, then the current device indicator light lights.]
2.
Press "MUTE" button without release, then enter the search status after 2secs. The programme
sends out 15 sets of datas of power buttons every secs, and the current device indicator light
flashes simultaneously. When there is action from current device(such as the TV appears mute
sympol), release "MUTE" button, then the current device indicator light flashes every 1.5secs.
When the current device has more action(such as TV appears VOLUMN control), press "SET"
3.
"OK" or any device buttons to exit with save. The indicator light will turn off.
Attn：
If press "MUTE" without release, the current device indicators will flash four times after a whole
search, and then will exit search without saving the codes
Function of Code
1.
Press the device button which you want to display
2.
SET(or the device button you want to display)+green button will display the first digit number
[RIGHT] button during the search
- 4 -